| Customization: | Available |
|---|---|
| After-sales Service: | Online Support and Applications |
| Wavelength Coverage(Nm): | 185-900nm |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Excellent total reflection optical system to ensure excellent signal to noise ratio of the instrument.
2.Fully safe intelligent gas control module.
3.Fully automatic instrument control,the light source supports high-performance element lamp,and can be completed quickly with one button.
4.Advanced lamp position 8 lamp frame 360 degree rotation design.
5.Design novel atomizer and intelligent lifting.
6.RG-WinAAS workstation software is simple,professional,automatic and complete under MS Window system.
7.Heating method of graphite furnace: The horizontal heating method of graphite furnace (to ensure the uniform temperature of gas phase in the graphite tube, so that the sample can reach the atomization temperature simultaneously in an instant and improve the atom the efficiency and test accuracy are improved to ensure more accurate analysis results, reduce the requirements on the furnace body, and delay the service life).
8.Safety protection system:
-flame monitor (automatic shutdown of acetylene and alarm when abnormality occurs),
-unique acetylene protector (micro leakage acetylene exceeds the warning concentration, set in front of the explosion point alarm),
-abnormal pressure monitor (when the air pressure is abnormal, the acetylene gas circuit is automatically closed),
-reliable position identification (combustion head installation detection, liquid level detection, etc.),
-graphite furnace protection measures (simultaneous detection of protective gas pressure and cooling water flow abnormal fluctuation occurs, heating is stopped and alarm is given).
| Optical System | Instrument type | Single beam |
| Monochromator | Aberration elimination C-T type, focal length 350mm | |
| Dispersion Element | The grating is 1800 lines/mm and the flicker wavelength is 250nm | |
| Wavelength Band(nm) | 0.1, 0.2, 0.4, 0.7, 1.4, 2nm six automatic switching | |
| Wavelength Coverage(nm) | 185-900nm | |
| Wavelength Indication Error (nm) | ±0.2nm | |
| Wavelength Repeatability(nm) | ≤0.1nm | |
| Bandwidth Deviation of The Spectrum | ±0.02nm | |
| Photometric performance | Reading Method | Transmittance, Absorbance, Concentration |
| The Range of Light | 0-125%, -0.1-3.00A | |
| Cu Static Baseline Drift | ±0.003A/30min | |
| Cu Dynamic Baseline Drift | ±0.005A/15min | |
| Flame Analysis | Characteristic Concentration (Cu) | ≤0.035ug/ml |
| Detection Limit (Cu) | ≤0.006ug/ml | |
| Repetitiveness | RSD≤0.6% | |
| Acetylene Flow Regulation | Automatic 12 gear | |
| Air-assisted Regulation | Automatic 4 gear | |
| The Burner is Raised | Automatic elevation | |
| Safety Precautions | Abnormal pressure protection of flame gas and combustion gas | |
| Graphite Furnace Analysis | Characteristic | Cd characteristic value ≤0.6pg; Cu characteristic value ≤20pg |
| Detection Limit | Cd detection limit ≤1.0pg; Cu detection limit ≤25pg | |
| Repetitiveness(Cd) | RSD≤3% | |
| Heating Range of Graphite Furnace | Room temperature ~3000ºC | |
| Heating Rate | Maximum heating rate 2000°ºC/s | |
| Out-of-tube Protective Gas Flow | 1L/min | |
| Influent Gas Flow Rate In The Pipe | Four adjustable levels (0, 50,200,250 ml/min flow) | |
| Data Ocessing and Other | Measurement Method | Flame method, graphite furnace method, argon generation-atomic absorption method, flame emission method |
| Report Printing | Parameter printing, data result printing | |
| End-use Temperature | 10ºC~30ºC | |
| Use Humidity | 40%-85% | |
| Power Requirement | Voltage 220V±22V, frequency 50Hz±1Hz |
For equipment, we usually offer ply-wooden cases free Fumigation,or multilayer carton boxes,or customized foam or aluminum suitcase. For some consumables and reagents, we use foam box with ice bag to guarantee the suitable temperature.Wooden packages are commonly used.
Q1:How to choose the suitable one?
Please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
Q2: How about quality of the goods?
All the running products comply with CE standards. Independent quality inspection team, conducting multiple inspections and random inspections from parts supply to product dispatch.Well-known third-party testing service available, such as SGS, BV, and TUV, etc.
Q3: What are your pre- and after-sales services?
Timely reply to pre-sales enquiries
Real-time update of manufacturing and shipment status
Assured availability of parts supply for 10 years at least
Q4: Is OEM service available?
Most of the running products are available for OEM customization, including logo, package and function, if attainable, customization.
Q5: How long is the lead time?
Generally, the lead time for most stocked products is about 7~15 days. For those non-stocked products, the manufacturing lead time is around 20 days.
Q6: Is it will be broken during transport?
Please don't worry, our goods are with standard export package.
Q7: What is our advantages?
Competitive price. High quality machine.Excellent technical support.
Help you analyze the advantages and disadvantages of the product, so that you have a more comprehensive understanding of the product.
){kind=link}