| Customization: | Available |
|---|---|
| After-sales Service: | Online Support and Applications |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Model |
SWD |
||
|
Max. Force |
100N/200N/250N/500N/1000N/2000N/5000N |
||
|
Accuracy Grade |
Level 0.5 | ||
|
Structure |
Single-column | ||
| Test Force Indication Error Limit | Within ±0.5% of Displayed Value | ||
|
Load Measurement Range |
0.4% to 100% FS of Full Scale | ||
| Force Resolution |
1/500,000 of Maximum Test Force |
||
|
Minimum Displacement Resolution |
0.0001mm |
||
| Force Control Rate Adjustment Range |
0.05 to 5% FS/s |
||
|
Force Control Rate Relative Error |
Within ±0.5% of Set Value | ||
| Deformation Rate Adjustment Range |
0.05 to 5% FS/s |
||
|
Weight |
About 120 --200kg |
||
| Power Supply | 220V 50Hz | ||
| Constant force, constant deformation, and constant displacement control range | 0.5% to 100% FS | ||
| Constant force, constant deformation, and constant displacement control accuracy | Within ±0.5% of the set value | ||
This test and control system is a high-performance, integrated measurement and control instrument designed specifically for electronic universal testing machines. It can perform tests such as tension, compression, flexure, shear, tear, and peel tests. The software calculates and displays in real time parameters such as maximum force, maximum deformation, tensile strength, elongation at break, total elongation at maximum force, elongation at yield point, elongation after break, upper and lower yield strengths, elastic modulus, yield point force, elongation at break, elongation at yield point, tensile strength at break, tensile stress at yield point, stress at constant tensile strength, and elongation at constant force (based on user-specified constant force levels). The constant tensile strength and constant force levels can be entered into the software's corresponding locations on the specimen parameter screen according to customer requirements. Other parameters that can be calculated include compressive strength, upper and lower compressive yield strengths, compressive elastic modulus, flexural strength, flexural elastic modulus, average flexural force, average peel force, peel strength, maximum peel force, minimum peel force, tear strength, average shear force, shear strength, and shear modulus, among other mechanical and physical properties.
Functions
a) Automatic Zeroing: The measurement system automatically resets to zero upon receiving the test start command.
b) Automatic Return: After automatically identifying a test fracture, the movable crosshead automatically returns to its initial position at high speed.
c) Automatic Storage: Test data and experimental conditions are automatically saved, eliminating data loss due to power outages and forgotten saves.
d) Automatic Speed Shift: During the test, the crosshead speed can be automatically changed according to a pre-set program or manually.
e) Automatic Calibration: The system automatically calibrates the displayed value.
f) Test Process: The test process, measurement, display, and analysis are all performed by the microcomputer.
g) Display Mode: Data and curves are dynamically displayed as the test progresses.
h) Result Replay: Test results can be stored and retrieved at will, allowing for reanalysis of data curves.
i) Curve Traversal: After the test is completed, the mouse can be used to find the curve. Output the force and deformation data of each point of the test curve, which is convenient and practical for obtaining test data of various materials;
j) Result comparison: Multiple test characteristic curves can be superimposed, reproduced, and amplified in different colors to present the analysis and comparison of a group of specimens;
k) Curve selection: Stress-strain, force-time, strength-time and other curves can be selected for display and printing as needed;
l) Batch testing: After setting the test parameters once, a batch of specimens can be tested in sequence;
m) Test report: (standard program)
(1) Tensile: maximum force, tensile strength, elongation at break, elastic modulus
(2) Bending: maximum force, bending strength, deflection, elastic modulus
(3) Compression: maximum force, compression strength, yield strength, elastic modulus. Test reports can also be programmed and printed in the format required by the user. n) Crossbeam Fine Adjustment: Equipped with a fine adjustment function for fine adjustments of the crossbeam, it is convenient and practical during calibration and verification.
o) Limit Protection: Features both programmable and mechanical protection.
p) Overload Protection: Shuts down the machine when the load exceeds 10% of the rated value.
q) Emergency Stop: Equipped with an emergency stop switch to shut down the entire machine in an emergency.
r) Automatic Diagnosis: The system features an automatic diagnostic function that regularly checks the measurement and drive systems for overvoltage, overcurrent, and overtemperature, immediately shutting down the machine if any abnormality is detected.
Multiple Uses: By configuring sensors of different specifications and connecting to the system measurement software, a single machine can be used for multiple purposes.
FAQ
){kind=link}